Quanta Computer QuantaMesh User Manual page 144

UANTA COMPUTER INC.
5.2.8.6 show ipv6 mld snooping ssm entries
The user can go to the CLI Privilege Exec to display the MLD Snooping ssm entries in the Source
Specific Multicast Forwarding Database (MFDB) table, use the show ipv6 mld snooping ssm entries
Privilege command.
Syntax
show ipv6 mld snooping ssm entries
Default Setting
None
Command Mode
Privilege Exec
Display Message
VLAN ID: The VLAN on which the entry is learned.
Group: The IPv6 multicast group address.
Source Ip: The IPv6 source address.
Source Filter Mode: The source filter mode (Include/Exclude) for the specified group.
Interfaces:
3) If Source Filter Mode is "include ", specifies the list of interfaces on which a incoming packet is
forwarded. If it's source IP address is equal to the current entry's Source, the destination IP
address is equal to the current entry's Group and the VLAN ID on which it arrived is current
entry's VLAN.
4) If Source Filter Mode is "Exclude", specifies the list of interfaces on which a incoming packet is
forwarded. If it's source IP address is *not* equal to the current entry's Source, the destination IP
address is equal to the current entry's Group and the VLAN ID on which it arrived is current
entry's VLAN.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 144