Quanta Computer QuantaMesh User Manual page 821

UANTA COMPUTER INC.
7.1.1.3 show ip dvmrp neighbor
This command displays the neighbor information for DVMRP.
Syntax
show ip dvmrp neighbor
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
IfIndex: This field displays the value of the interface used to reach the neighbor.
Nbr IP Addr: This field indicates the IP Address of the DVMRP neighbor for which this entry
contains information.
State: This field displays the state of the neighboring router. The possible value for this field
are ACTIVE or DOWN.
Up Time: This field indicates the time since this neighboring router was learned.
Expiry Time: This field indicates the time remaining for the neighbor to age out. This field is not
applicable if the State is DOWN.
Generation ID: This is the Generation ID value for the neighbor.
Major Version: This shows the major version of DVMRP protocol of neighbor.
Minor Version: This shows the minor version of DVMRP protocol of neighbor.
Capabilities: This shows the capabilities of neighbor.
Received Routes: This shows the number of routes received from the neighbor.
Rcvd Bad Pkts: This field displays the number of invalid packets received from this neighbor.
Rcvd Bad Routes: This field displays the number of correct packets received with invalid routes.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 821