Quanta Computer QuantaMesh User Manual page 218

UANTA COMPUTER INC.
SNMP v3 – Uses SNMP v3 to send traps to the receiver.
UDP Port: The UDP port the trap or inform will be sent to.
Filter name: The filter the traps will be limited by for this host.
TO Sec: The number of seconds before informs will time out when sending to this host.
Retries: The number of times informs will be sent after timing out.
Username: The user this mapping configures.
Security Level: The authentication and encryption level for snmpv3.
NoAuth-N – no authentication checksum and no encryption algorithm assigned.
Auth-NoP – md5 or sha authentication checksum assigned and no encryption algorithm
assigned.
Auth-Pri – md5 or sha authentication checksum and des encryption algorithm assigned.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 218