Quanta Computer QuantaMesh User Manual page 894

UANTA COMPUTER INC.
7.8.1.3 show ipv6 mld-proxy groups detail
This command displays information about multicast groups that MLD-Proxy reported.
Syntax
show ipv6 mld-proxy groups detail
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: The interface number of the MLD-Proxy.
Group Address: The IP address of the multicast group.
Last Reporter: The IP address of host that last sent a membership report for the current
group, on the network attached to the MLD-Proxy interface (upstream interface).
Up Time (in secs): The time elapsed since last created.
Member State: Possible values are:
•
Idle_Member - interface has responded to the latest group membership query for this group.
•
Delay_Member - interface is going to send a group membership report to respond to a group
membership query for this group.
Filter Mode: Possible values are include or exclude.
Sources: The number of sources attached to the multicast group.
Group Source List: The list of IP addresses of the sources attached to the multicast group.
Expiry Time: Time left before a source is deleted.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 894