Dhcp Client Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.3.10 DHCP Client Commands

5.3.10.1 ip dhcp restart
This command is used to initiate a BOOTP or DCHP client request.
Syntax
ip dhcp restart
Default Setting
None
Command Mode
Global Config
5.3.10.2 ip dhcp client-identifier
This command is used to specify the DCHP client identifier for this switch. Use the no form to restore to
default value.
Syntax
ip dhcp client-identifier {text <text> | hex <hex>}
no ip dhcp client-identifier
<text> - A text string. (Range: 1-32 characters).
<hex> - The hexadecimal value (00:00:00:00:00:00).
no - This command is used to restore to default value.
Default Setting
A text string : "Default"
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 248