Show Dcb Fip-Snooping Fcf - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

9.1.4 show dcb fip-snooping fcf

This command displays to what interfaces the FCFs are connected for the entire system.
Syntax
show dcb fip-snooping fcf
Default Setting
None
Command Mode
Privileged Exec
Display Message
FCF MAC: MAC address of the FCF.
FCF Interface Number: Name of the interface to which the FCoE Forwarder (FCF) is connected.
VLAN ID: ID number of the VLAN to which the FCF belongs.
FC MAP: May FC-Map value used by the FCF.
Switch Name: Name ID.
Fabric Name: Name of the FCF.
QuantaMesh | Data Center Bridging Commands
Layer 2/3/4 Managed Switch
988