Quanta Computer QuantaMesh User Manual page 156

UANTA COMPUTER INC.
5.2.9.4 ipv6 mld snooping querier
The user can go to the CLI Global Configuration Mode to set MLD snooping querier admin mode, use
the ipv6 mld snooping querier global configuration command. Use the no ipv6 mld snooping querier
to disable.
Syntax
ipv6 mld snooping querier
no ipv6 mld snooping querier
Default Setting
Disabled
Command Mode
Global Config
5.2.9.5 ipv6 mld snooping querier address
The user can go to the CLI Global Configuration Mode to set MLD snooping querier address, use the
ipv6 mld snooping querier address <ipv6-address> global configuration command. Use the ipv6 mld
snooping querier address <ipv6-address> return to default value zero.
Syntax
ipv6 mld snooping querier address <ipv6-address>
no ipv6 mld snooping querier address <ipv6-address>
<ipv6-address> - The IPv6 address of the MLD querier on the subnet the interface is associated
with.
Default Setting
::
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 156