Search:transition:qualifier - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

28
:SEARch Commands

:SEARch:TRANsition:QUALifier

Command Syntax
:SEARch:TRANsition:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan}
The :SEARch:TRANsition:QUALifier command specifies whether to search
for edge transitions greater than or less than a time.
Query Syntax
:SEARch:TRANsition:QUALifier?
The :SEARch:TRANsition:QUALifier? query returns the current transition
search qualifier.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS}
See Also
•
•
•
798
(see page 1138)
Chapter 28, ":SEARch Commands," starting on page 777
":SEARch:MODE" on page 780
":SEARch:TRANsition:TIME"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 801