RIP Commands
configure rip vlan rxmode
configure rip [vlan <vlan-name> | all] rxmode [none | v1only | v2only |
any]
Description
Changes the RIP receive mode for one or all VLANs.
Syntax Description
none
v1only
v2only
any
vlan-name
all
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the receive mode for the VLAN finance to accept only RIP version 1
format packets:
configure rip finance rxmode v1only
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1216
Specifies to drop all received RIP packets.
Specifies to accept only RIP version 1 format packets.
Specifies to accept only RIP version 2 format packets.
Specifies to accept RIP version 1 and RIP version 2 packets.
Specifies to apply settings to specific VLAN name.
Specifies all VLANs.
ExtremeWare XOS 11.3 Command Reference