Show Iproute Ipv6 - Extreme Networks ExtremeWare XOS Command Reference Manual

show iproute ipv6

show iproute ipv6 {priority | vlan <vlan_name> | tunnel <tunnel-name> |
<ipv6Netmask> | summary} {multicast | unicast} {vr <vrname>}}
Description
Displays the contents of the IPv6 routing table.
Syntax Description
priority
vlan_name
ipv6Netmask
summary
Default
N/A.
Usage Guidelines
If a route is active and in use, it is preceded in the display by an "*". If there are multiple routes to the
same destination network, the "*" will indicate which route is the most preferable route.
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command displays detailed information about all IPv6 routing:
show iproute ipv6
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies to display route priority.
Specifies a VLAN name.
Specifies an IPv6 address/prefix length.
Specifies summary information
show iproute ipv6
1199