Configure Rip Import-Policy - Extreme Networks ExtremeWare XOS Command Reference Manual

RIP Commands

configure rip import-policy

configure rip import-policy [<policy-name> | none]
Description
Associates or removes the policy applied to RIP routes added to the system routing table.
Syntax Description
policy-name Specifies the policy to apply.
Default
No policy.
Usage Guidelines
Use this command to associate a policy with the RIP routes installed into the system table. Use the
none
option to remove the policy association.
Example
The following example applies the policy campuseast to RIP routes:
configure rip import-policy campuseast
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1214
ExtremeWare XOS 11.3 Command Reference