Show Ports Qosmonitor - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

QoS Commands

show ports qosmonitor

show ports {mgmt | <portlist>} qosmonitor {egress | ingress} {discards}

Displays real-time QoS statistics for egress packets on one or more ports.

Syntax Description

Shows QoS statistics for all ports in egress.

Usage Guidelines

The real-time display scrolls through the given portlist to provide statistics. You can choose screens for

packet count and packets per second. The specific port being monitored is indicated by an asterisk (*)

appearing after the port number in the display.

QoS monitor sampling is configured as follows:

• The port is monitored for 20 seconds before the switch moves on to the next port in the list.

• A port is sampled for five seconds before the packets per second (pps) value is displayed on the

The following command shows the real-time QoS statistics related to the specified ports:

show ports 1-2, 49 qosmonitor

Following is sample output from this command:

Qos Monitor Egress Queue Summary

================================================================================

Specifies the management port. Supported only for switches that provide a

management port.

Specifies one or more ports or slots and ports. On a modular switch, can be a

list of slots and ports. On a stand-alone switch, can be one or more port

numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.

Specifies to display statistics in egress. Default.

Specifies to display statistics in ingress.

Specifies to display packets discarded.

Mon Oct 21 20:35:21 2002

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0