Show Bgp Neighbor - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
BGP Commands

show bgp neighbor

show bgp [neighbor {detail} | {neighbor} <remoteaddr>]
Description
Displays information about a specified neighbor.
Syntax Description
remoteaddr
detail
Default
N/A.
Usage Guidelines
Use this command to display information about a specific BGP neighbor. If you do not specify a
neighbor, information about all neighbors is displayed.
Example
The following command displays information about a specified neighbor:
show bgp neighbor 10.10.10.10
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1774
Specifies an IP address that identifies a BGP neighbor.
Specifies to display the information in detailed format.
ExtremeWare XOS 11.5 Command Reference Guide