IP Unicast Commands
enable icmp timestamp
enable icmp timestamp {vlan <vlan name>}
Description
Enables the generation of an ICMP timestamp response on one or all VLANs.
Syntax Description
vlan name
Specifies a VLAN name.
Default
Enabled
Usage Guidelines
Enables the generation of an ICMP timestamp response (type 14, code 0) when an ICMP timestamp
request is received. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually
forwarded by the switch is controlled by the access-list commands.
Example
The following command enables the generation of an ICMP timestamp response on VLAN accounting:
enable icmp timestamp vlan accounting
History
This command was first available in ExtremeWare 6.1.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1664
ExtremeWare 7.5 Command Reference Guide