Show Vrrp Vlan Stats - Extreme Networks ExtremeWare Command Reference Manual

VRRP Commands

show vrrp vlan stats

show vrrp vlan <vlan name> stats
Description
Displays VRRP statistics for a particular VLAN.
Syntax Description
vlan name Specifies the name of a VRRP VLAN.
Default
N/A
Usage Guidelines
Use this command to show the statistics or counters for the VRRP protocol for a VLAN.
Example
The following command displays statistics for VLAN v1:
show vrrp vlan v1 stats
It produces output similar to the following:
VLAN v1
Chksum Err:0, Ver Err:0, VRID Err:0, Auth Mismatch:0, Pkt-len Err:0
Become Master:2, Adv recv:0, Adv Err:0, Auth Fail:0, TTL Err:0
Pri-0-recv:0, Pri-0-snt:1, Addr-List Err:0, Invalid Auth Err:0
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
1582 ExtremeWare 7.5 Command Reference Guide