ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
show esrp counters
show esrp {<name>} counters
Description
Displays ESRP counter information for ESRP or for a specified ESRP domain.
Syntax Description
name
Default
Displays summary ESRP counter information.
Usage Guidelines
The
show esrp counters
Failed received protocol packets
●
Failed sent protocol packets
●
Dropped protocol packets belonging to unknown ESRP domains
●
Dropped protocol packets due to invalid Extreme Encapsulation Protocol (EEP) data
●
Dropped packets due to old sequence numbers
●
Dropped packets due to an invalid 802.1Q tag
●
Dropped packets because the packet length was truncated (packet length is less than expected)
●
Dropped packets due to failed checksum verification
●
The
show esrp {<name>} counters
ESRP-aware, and ESRP error packets were transmitted and received.
Example
The following command displays ESRP counter information:
show esrp counters
The following is sample output from this command:
Current-time:
esrpStatsRxHelloFailed
esrpStatsTxHelloFailed
esrpStatsUnknownDomain
esrpStatsUnsupportedEEPVersion
esrpStatsInvalidEEPLength
esrpStatsNotInTimeWindow
esrpStatsInvalid8021Qtag
ExtremeWare XOS 11.5 Command Reference Guide
Specifies an ESRP domain name.
command displays information about the number of:
command displays information about the number of times ESRP,
Sun Nov 16 00:25:08 2003
= 0
= 0
= 0
= 0
= 0
= 0
= 0
show esrp counters
1293