Show Esrp-Aware - Extreme Networks ExtremeWare Command Reference Manual

show esrp-aware

show esrp-aware
show esrp-aware [vlan <vlan name>]
Description
Displays ESRP awareness information.
Syntax Description
vlan name Specifies a VLAN name.
Default
Without the vlan option, the show command displays all VLAN interfaces receiving ESRP packets.
Usage Guidelines
The VLANs associated with the ports connecting an ESRP-aware switch to an ESRP-enabled switch
must be configured using an 802.1Q tag on the connecting port, or, if only a single VLAN is involved, as
untagged.
Example
The following command displays ESRP awareness information for a VLAN named esrpEn.
* Summit400-48t:8 # show esrp-aware vlan "esrpEn"
The output of the command is similar to the following:
VLAN Interface: [esrpEn]. DisableLearnTimeout=0 secs, Total-Fdb-Flushes=0
Esrp-Group:0 Esrp-Master-Mac=00:04:96:14:46:90, Age=1 secs
History
This command was first available in ExtremeWare 7.2e.
Platform Availability
This command is only available on the "e" series platform of switches.
ExtremeWare 7.5 Command Reference Guide 115