Enable Stpd - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
STP Commands

enable stpd

enable stpd {<stpd_name>}
Description
Enables the STP protocol for one or all STPDs.
Syntax Description
stpd_name Specifies an STPD name on the switch.
Default
Disabled.
Usage Guidelines
If you want to enable the STP protocol for all STPDs, do not specify an STPD name.
Example
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1214
ExtremeWare XOS 11.5 Command Reference Guide