Show Log Components - Extreme Networks ExtremeWare Command Reference Manual

show log components

show log components {<event component> | all}
Description
Display the name, description and default severity for all components.
Syntax Description
event component
all
Default
N/A.
Usage Guidelines
This command displays the name, description, and default severity defined for the specified
components and subcomponents.
Example
The following command displays the log components:
show log components
The output produced by the
show log components
Component
------------------- ---------------------------------------------- -------------
BGP
Dampening
Event
Keepalive
Message
Misc
UpdateIn
UpdateOut
Bridge
Learning
EAPS
MSMFailover EAPS MSM Failover
SharedPort
EDP
ELRP
ESRP
Aware
Message
MSMFailover ESRP MSM Failover
State
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies component to display.
Displays all components.
show log components
Title
Border Gateway Protocol
BGP Route Flap Dampening
BGP Finite State Machine
BGP Keepalive Messages
BGP Messages (Open, Update, Notification)
BGP Miscellaneous (Import, Aggregate, NextHop) Error
BGP Incoming Update Messages
BGP Outgoing Update Messages
Layer 2 Bridging
Layer 2 Bridge Learning
Ethernet Automatic Protection Switching (EAPS) Error
EAPS SharedPort Domain
Extreme Discovery Protocol (EDP)
Extreme Loop Recovery Protocol (ELRP)
Extreme Standby Router Protocol (ESRP)
ESRP Aware Processing
ESRP PDU Tx/Rx
ESRP State Transitions
command is similar to the following:
show log components
Severity
Threshold
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Notice
Notice
Error
Error
Notice
717