Redundant Power Supply (RPS) alarm condition (Extreme proprietary trap): This alarm indicates
●
that an attached redundant power supply is transmitting an alarm.
SNMP unreachable (EPICenter event): This alarm indicates that EPICenter is unable to
●
communicate with a device using SNMP.
Stack Member down (EPICenter event): EPICenter has detected that a stack member is down.
●
Stacking Link down (EPICenter event): EPICenter has detected that a stack link is down.
●
The Alarm Log Browser
Click the Alarm button in the Navigation Toolbar to run the Alarm System applet and view the Alarm
Log Browser. The Alarm Log Browser page appears, as shown in
Figure 45: The Alarm Log Browser page
Predefined filters
EPICenter standard menus
New alarm
indicator
The Alarm button (icon) in the Navigation Toolbar acts as an alarm indicator—if it is displayed in red
instead of black, it indicates that at least one new alarm has occurred.
EPICenter Reference Guide
Alarm System module tabs
Alarm summary
Figure
45.
Acknowledged alarms
Current filter definition
The Alarm Log Browser
Number of alarms
displayed (per filter)
103