Address (Address_Collection_Type) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1 Manual

Network and Security Manager 2010.4 API Guide
Table 20: Service Collection Data Elements (continued)
Data Element
source
type
comment
predefined
avail
category
idpname
fwname
support-on_collection
versions

Address (address_collection_type)

56
Description
Source
ICMP type.
Comments about the service collection.
Predefined (Boolean)
Predefined service is available.
Category of service type.
IDP name
Firewall name
Supported on collection.
Service collection version.
The address collection (address_collection_type) enables you to work with addresses.
Addresses are the workstations, routers, switches, subnetworks, and other components
that are connected to your network. In multicast routing, a multicast address specifies
the multicast group to which the data is sent. Related addresses may be aggregated into
address groups.
These data elements are illustrated and described in Figure 16 on page 57 and Table 21
on page 57.
Copyright © 2010, Juniper Networks, Inc.