Configuring Arp (Web Interface); Figure 19 Address Resolution Page - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)

Configuring ARP (Web Interface)

Manage Address Resolution Protocol (ARP) entries.
To manage ARP entries:
•
From the left navigation pane in the System Config tab, select ARP.
The Address Resolution page is displayed. See
Figure 19 Address Resolution Page
Static and Dynamic ARP Entries
View and remove Static and Dynamic ARP Entries. See
To view and remove static and dynamic ARP entry status:
1. View this information:
• IP address—The configured IP address for this entry.
• MAC address—The physical address of this entry.
• Interface—The port configured for this entry.
• Active—Whether or not this entry is being used currently.
• Static—Whether or not this entry comes from DNS.
130 Configuring Static Hosts and ARP (Web Interface)
Media Flow Controller Administrator's Guide
Figure 19.
Figure 19.
Copyright © 2010, Juniper Networks, Inc.