Motd-Banner - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 13: M Commands

motd-banner

[ no | default ] motd-banner
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Controls display of a message-of-the-day banner (configured with the banner
Description
command) on a particular line when a connection is initiated. The no version disables
the motd banner on the line; the motd banner is also disabled by the no exec-banner
command. The default version restores the default setting, in which the banner is
enabled on all lines.
Line Configuration
Mode
1315
motd-banner