System Messages - Auerswald COMpact 5200 Advanced Information

System messages

System messages are used to inform administrators and users about
system events such as operating errors. Every event that happens in the
system is logged. E-mails with information about the events can also be sent
out.
The following different types of system event are possible:
• system information, e.g. automatic memory clean-up and memory
check (Voice Mail/Fax function), switch between configurations, switch
relays on/off, send system e-mails, register in Configuration Manager
• simple malfunctions, e.g. automatic memory clean-up and memory
check (Voice Mail/Fax function) errors
• serious malfunctions, e.g. fan fault (only COMpact 5000R/5200R/
5500R), alarm temperature exceeded
• security warnings, e.g. failed logon attempts, entries in the IP blacklist,
Admin password change
Proceed as follows to set up system messages:
• Configure DNS server.
– Using the Configuration Manager (page Administration > Configu-
ration IP
• Configure outgoing mail server.
– Using the Configuration Manager (page Administration > Courrier
électronique > Serveur du courrier sortant)
• If necessary, set up the language file.
– Using the Configuration Manager (page Administration > Courrier
électronique > Internationalisation)
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
System messages
179