Mounting Line/Trunk Card For T1; Figure 2-8 Mounting Location Of Line/Trunk Card For T1; Table 2-1 Ltc Connector Accommodation For T1 - NEC NEAX2000 IVS2 Manual

Mounting Line/Trunk Card for T1

(1) Mount line/trunk cards in the LT slots on the Remote PIM.
(2) Connect the line cables by referring to

Figure 2-8 Mounting Location of Line/Trunk Card for T1

AC/DC
PWR
Remote PIM
DC/DC
PWR
*1 When providing only one DAIB card (Max. 23 ports): LT00~LT02 slot
*2 When providing one DAIB card and one DAIC card (Max. 47 ports): LT00~LT05 slot
*3 When providing one DAIB card and two DAIC cards (Max. 63 ports): LT00~LT11 slot
NOTE: One port of the last 24 ports cannot be used for line/trunk because it is used for
control signaling channel.

Table 2-1 LTC Connector Accommodation for T1

LTC CONNECTOR
2
NEAX2000 IVS Remote PIM System Manual
ND-70917 (E), Issue 1.0
LTC0
LTC0
LTC1
LTC2
LTC3
Figure 2-8 and Table
*1
*2
LTC1
LTC2
BWB
FRONT
CARD SLOT NUMBER
CHAPTER 2 INSTALLATION
Installation for Remote Site
2-1.
*3
LTC3
LT00~LT02
LT03~LT05
LT06~LT08
LT09~LT11
Page 31