Replacement Procedure Of Line/Trunk Circuit Cards - NEC Univerge SV8500 Operation And Maintenance Manual

1.2

Replacement Procedure of Line/Trunk Circuit Cards

[Start]
STEP 1 Turn ON (upward) the MB (Make Busy) switch of the circuit card to be re-
placed.
STEP 2 Pull out the circuit card mounted on the slot.
STEP 3 Set the same key setting on the new circuit card as that is set on the removed card.
STEP 4 Confirm that MB (Make Busy) switch of the new circuit card is turned ON (upward).
STEP 5 Insert the new circuit card to the slot
STEP 6 After new circuit card is inserted, turn the MB (Make Busy) switch to OFF (downward).
[End]
CHAPTER 5 Operation Procedure for System with PIR
– 553 –
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required