Status Display (Blade/Trunk) - NEC UNIVERGE SV8300 Pc Programming Manual

Status Display (Blade/Trunk)

The [Status Display (Blade/Trunk)] menu reads blade information and the status of port operation from the
SV8300 and displays such on the screen. Operating status can be updated automatically and manually. If
automatic update has been selected, the operating status can be verified on the screen in real time. One of
the following action will display the [Status Display (Blade/Trunk)] screen in the work window:
• Click submenu [Status Display (Blade/Trunk)] in Standard Mode.
• On the Main Menu, click [System] > [Maintenance] > [Status Display (Blade/Trunk)] in this order.
NOTE: Establish a communication link with the SV8300 before proceeding with software authentica-
tion.
For how to establish a communication link, refer "Establishing a Link".
[Status display(Blade/Trunk)]
No. Item
(1) "Status Display of CPU
Blade" radio button
(2) "Status Display of
Blade" radio button
(3) "Status Display of
Trunk" radio button
(4) [Next >>] button
(1)
menu
(2)
(3)
(4)
Not used.
Check to view the operating status of various blades.
Check to view the usage status of trunk.
Click to display a screen for viewing the operating status of the
selected item.
Description
4-74
Chapter 4 Standard Mode
[Maintenance] Category
Page 2-12
NWA-033628-001 Rev.1.0