Changeover, 1 Motor With Max. 4 Data Sets (P1013 = 2) - Siemens SIMODRIVE 611 universal Function Manual

6 Description of the Functions
6.11 Motor changeover for induction motors (from SW 2.4)
6.11.3

Changeover, 1 motor with max. 4 data sets (P1013 = 2)

Description
Input/output
signals
6-588
For this changeover version (P1013 = 2) for one motor, a maximum of
4 motor data sets can be changed over.
Note
The pulses are not canceled at changeover, i.e. the changeover is
made with the pulses enabled.
This version can be used to adapt the motor and controller data.
The following input/output signals are used for this changeover version:
Table 6-63 Input/output terminal signals
Input terminal
with motor data set
function No.
6 5
0 0
0 1
1 0
1 1
1) The output terminals with function numbers 11 to 14 are not energized.
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Effective
1)
14
P1xxx 0
P2xxx 0
P3xxx 0
P4xxx 0
E Siemens AG 2005 All Rights Reserved
01.99 04.99
! not 611ue !
Output terminal
with
function No.
1) 1) 1)
13 12 11
0 0 0
0 0 0
0 0 0
0 0 0