Siemens SIMODRIVE 611 universal Function Manual page 844

A Lists
A.1 Parameter list
1653 Minimum value Min/Max memory
Min Standard
– –
Displays the min. value in the min/max memory.
1654 Maximum value Min/Max memory
Min Standard
– –
Displays the max. value in the min/max memory.
1655 Segment memory location monitor
Min Standard
0 0
Select the segment for the monitor function.
0 Segment X: (Monitor)
1 Segment Y: (Monitor)
1656 Address memory location monitor
Min Standard
0 0
Select the address for the monitor function.
1657 Value display monitor
Min Standard
– –
Displays the contents of the address in P1655/P1656.
1658 Value input monitor
Min Standard
0 0
Note: Internal Siemens
1659 Value acceptance monitor
Min Standard
0 0
Note: Internal Siemens
1701 DC link voltage
Min Standard
– –
... is used for continuous display (measurement) of the DC link voltage.
Note:
If a value > 0 V is in P1161 (fixed DC link voltage), then this display is not valid.
The DC link voltage is centrally measured at the NE module. This means that the DC link con-
nection to the drive modules cannot be checked using P1701.
1703 Lead time, motor measuring system conversion
Min Standard
– –
Note: Internal Siemens
A-844
Max Unit
– Hex
Max Unit
– Hex
Max Unit
1 Hex
Max Unit
FFFFFF Hex
Max Unit
– Hex
Max Unit
FFFFFF Hex
Max Unit
1 –
Max Unit
– V(pk)
Max Unit
µs
–
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
! 611ue diff !
Data type Effective
Unsigned32 RO
Data type Effective
Unsigned32 RO
Data type Effective
Unsigned16 immed.
Data type Effective
Unsigned32 immed.
Data type Effective
Unsigned32 RO
Data type Effective
Unsigned32 immed.
Data type Effective
Unsigned16 immed.
Data type Effective
Unsigned16 RO
Data type Effective
Unsigned16 RO
E Siemens AG 2005 All Rights Reserved
04.05 01.99