Diagnostics Via Data Sets - Siemens PROFINET SIRIUS 3RW5 Equipment Manual

7.3

Diagnostics via data sets

Data set 92: Communication module diagnostics (slot 1)
The communication module diagnostics describes the current status of the 3RW5 PROFINET
High Feature communication module.
Depending on the 3RW5 soft starter, you can read out and evaluate the communication module
diagnostics via data set 92 of the 3RW5 communication module (slot 1) (Page 161).
Data set 92: Soft starter diagnostics (slot 2)
The soft starter diagnostics describes the current condition of the 3RW5 soft starter.
Depending on the 3RW5 soft starter, you can read out and evaluate the Soft Starter Diagnosis via
data set 92 of the 3RW5 soft starter (slot 2) (Page 168).
Data set 92: HMI diagnostics (slot 3)
The HMI diagnostics describes the current status of the 3RW5 HMI High Feature.
Depending on the 3RW5 soft starter, you can read out and evaluate the HMI diagnostics via data
set 92 of the 3RW5 HMI High Feature (slot 3) (Page 195).
Data set 94: Measured values
The current measured values of the 3RW5 soft starter are acquired in this data set.
Depending on the 3RW5 soft starter, you can read out and evaluate the measured values via data
set 94 (Page 173).
Data set 95: Statistic data
The statistic data group together the operating states from the past that are relevant to the load.
Depending on the 3RW5 soft starter, you can read out and evaluate the statistic data via data
set 95 (Page 174).
Data set 96: Maximum pointer
The maximum pointers are stored extreme values of measured values from the past.
Depending on the 3RW5 soft starter, you can read out and evaluate the maximum pointers data
via data set 96 (Page 175).
Via a connection on the 3RW5 communication module, you can reset the maximum pointers in
the following ways:
• SIRIUS Soft Starter ES (TIA Portal) Premium / Professional
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Commissioning" > Window "Work area" > "Soft Starter > Maximum pointer"
• "Reset maximum pointer" command via data set 93 (Page 160)
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004
Messages and diagnostics
7.3 Diagnostics via data sets
77