Run-Up Of "Simodrive 611 Universal - Siemens SIMODRIVE 611 universal Function Manual

01.99
4.2 Run–up of "SIMODRIVE 611 universal"
General At run–up, a differentiation is made, as to whether the drive was al-
information ready commissioned.
S
S
Reader's note
Information regarding fault/error handling and diagnostics is provided
in Chapter 7.
Power–up the "SIMODRIVE 611 universal"
Run–up starts
no
Carry–out
commissioning
(e.g. specify the
power module, motor,
encoder, etc.
refer to
Chapter 4.3.1 or
Chapter 3.2.1)
Note:
Faults/errors which occur
at run–up, are displayed
flashing, in the display
unit.
Fig. 4-1 Run–up of "SIMODRIVE 611 universal"
E Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
4.2
Still not commissioned
⇒ The drive requests a commissioning routine
––> refer to Chapter 4.3.1 or 3.2.1
Already commissioned
⇒ When in an error–free condition, the drive runs up until the follow-
ing is displayed
"_ _ _ run".
START
Already
yes
commissioned?
The red LED is bright approx. 2 s
"_ _ _ r u n " is displayed
The red LED is dark
Run–up has been completed.
The drive is now in cyclic operation
END
4 Commissioning
Run–up of "SIMODRIVE 611 universal"
Red
FAULT
LED
Display unit
4
4-119