Siemens SIMODRIVE 611 universal Function Manual page 93

01.99
Key The following key combinations are available to make operator entries
combinations in the display types:
Table 3-2
Parameter Parameter
display
Sub–
parameter parameter
display display
Value display
1) Setting to the lower or the upper limit
E Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
3.2 Parameterizing using the display and operator unit
Key combinations for operator control in the display types
Display type Key
combinations
+
+ P
P
+
P
+
+ P
P
+
P
+
+ P
P
P
3 Parameterizing the Board
Meaning
Jump to the next higher existing param-
eter number
Jump to the next lower existing parame-
–
ter number
1)
Fast scrolling up
(jumps over five existing parameters)
1)
Fast scrolling down
–
(jumps over five existing parameters)
Jump to the same parameter of another
–
drive
Jump to the sub–parameter display or
to the value display
Jump to the next sub–parameter num-
ber or back to the parameter display
Jump to the previous sub–parameter
– number or back to the parameter dis-
play
1)
Fast scrolling up
(jumps over a maximum of five existing
sub–parameters)
1)
Fast scrolling down
–
(jumps over a maximum of five existing
sub–parameters)
Jump to the selected sub–parameter of
–
the same parameter of the other drive
Jump to the value display
Parameter is incremented by 1 (at the
least–significant position)
Parameter value is decremented by 1
–
(at the least significant position)
1)
Fast scrolling up
accelerating
1)
Fast scrolling down
–
accelerating
Jump to the parameter or sub–parame-
ter display
3
3-93