Siemens SIMODRIVE 611 universal Function Manual page 806

A Lists
A.1 Parameter list
1037 DM encoder configuration
Min Standard
0 0
... allows the encoder evaluation to be configured for a direct measuring system.
Bit 2 TTL encoder
Bit 3 Absolute encoder (EnDat interface)
Bit 4 Linear measuring system
Bit 5 Operation without direct measuring system
Bit 7 Distance-coded measuring system (from SW 4.1)
Note:
DM ––> Direct measuring system
Configuration of the indirect measuring system (IM, motor encoder) ––> refer to P1027
1038 DM serial number, low part (SRM SLM)
Min Standard
0 0
Note:
DM ––> Direct measuring system
1039 DM serial number, high part (SRM SLM)
Min Standard
0 0
Note:
DM ––> Direct measuring system
1040 DM pole pair number, resolver
Min Standard
0 1
... specifies the pole pair number of the resolver used.
Examples:
Resolver (pole pair number)
2p = 1 (1 speed)
2p = 2 (2 speed)
2p = 3 (3 speed)
2p = 4 (4 speed)
Note:
DM ––> Direct measuring system
Pole pair number for indirect measuring system (IM, motor encoder) ––> refer to P1018
1042 Encoder 1 fine resolution G1_XIST1
Min Standard
0 11
... defines how many fine resolution bits are transferred for the PROFIBUS encoder interface.
This parameter applies for the following:
– Fine resolution for process data G1_XIST1
– Fine resolution for G1_XIST2 for reference mark or flying measurement
A-806
Max Unit
FFFF Hex
Max Unit
FFFF Hex
Max Unit
FFFF Hex
Max Unit
64 –
Max Unit
11 –
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
! 611ue diff !
Data type Effective
Unsigned16 PO
Data type Effective
Unsigned16 PO
Data type Effective
Unsigned16 PO
Data type Effective
Unsigned16 PO
Data type Effective
Unsigned16 PO
E Siemens AG 2005 All Rights Reserved
01.99 04.05
(–> 3.3)
(–> 3.3)
(SRM SLM)
(–> 3.3)
(SRM SLM)
(–> 3.3)
(–> 3.3)