Siemens SIMODRIVE 611 universal Function Manual page 28

1 Product Overview
1.2 "SIMODRIVE 611 universal" in the SIMODRIVE 611 system
1.2 "SIMODRIVE 611 universal" in the SIMODRIVE 611
system
How is the
SIMODRIVE 611
universal
integrated into the
SIMODRIVE 611
system?
Engineering
1-28
"SIMODRIVE 611 universal" is implemented as digital control module
for two drives for operation in the SIMODRIVE 611 system.
A SIMODRIVE drive group is modular and comprises the following
modules and boards:
S
Commutating reactors
S
Supply infeed module (NE module)
S
Power module(s) with control board
– "SIMODRIVE 611 universal" or
– "SIMODRIVE 611 universal HR" (from the middle of 2002 with
SW 5.1)
Note
In the following chapters of the Description of Functions, a
differentiation is not made between "SIMODRIVE 611 universal" and
"SIMODRIVE 611 universal HR".
The functionality, specified under "SIMODRIVE 611 universal" also
applies for "SIMODRIVE 611 universal HR".
and, when required
S
Line filter
S
Monitoring and pulsed resistor module
S
Transformer
Reference: /PJU/, SIMODRIVE 611,
Configuration Manual, Drive Converters
Engineering a SIMODRIVE drive group is subdivided into the following
phases as follows:
S
Phase 1 (engineering)
– The motor is selected
– The power module and the supply infeed are selected
S
Phase 2 (integration)
– Create circuit diagrams
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
! 611ue diff !
E Siemens AG 2005 All Rights Reserved
08.02 01.99