Siemens SIMODRIVE 611 universal Function Manual page 759

Control components for closed-loop speed control and positioning
Table of Contents

Advertisement

01.99
04.05
! 611ue diff !
0626
Signal number analog output term. 75.x/15
Min
Standard
0
34
... defines which signal is output via terminal 75.x/15.
In this case the appropriate signal number must be entered from the "Signal selection list for
analog output".
Note: refer to the index entry "Analog outputs"
0627
Shift factor analog output term. 75.x/15
Min
Standard
0
0
... defines the shift factor, with which the analog signal is manipulated.
An 8 bit window of the 24/48 bit signal can be represented via the DAC. Thus, the shift factor
must be used to define which window of the internal 24/48 bit is to be displayed.
Note: refer to the index entry "Analog outputs"
0628
Offset analog output term. 75.x/15
Min
Standard
–128
0
... specifies an offset for the 8-bit output signal.
Note: refer to the index entry "Analog outputs"
0629
Segment address analog output term. 75.x/15
Min
Standard
0
0
Note: Internal Siemens
0630
Offset address analog output term. 75.x/15
Min
Standard
0
0
Note: Internal Siemens
0631
Bias protection, analog output, term. 75.x/15
Min
Standard
0
1
... switches the bias protection on or off.
1
bias protection on
The bits above the 8-bit window result in an output of +10 V or –10 V, i. e. the output cannot be
over-modulated.
0
bias protection off
The bits above the 8-bit window are ignored.
The analog value is defined exclusively by the 8-bit value, i.e. the output can be overmodulated.
Note: refer to the index entry "Analog outputs"
0632
Smoothing time, analog output, terminal 75.x/15
Min
Standard
0.0
0.0
... smooths the output signal with a 1st order proportional element (PT1 element, low pass fil-
ter).
0.0
filter is inactive
Note: refer to the index entry "Analog outputs"
E Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Max
Unit
530
Max
Unit
47
Max
Unit
127
Max
Unit
2
Max
Unit
FFFFFF
Hex
Max
Unit
1
Max
Unit
1000.0
ms
A.1
Parameter list
Data type
Effective
Unsigned16
immed.
Data type
Effective
Unsigned16
immed.
Data type
Effective
Integer16
immed.
Data type
Effective
Unsigned16
immed.
Data type
Effective
Unsigned32
immed.
Data type
Effective
Unsigned16
immed.
Data type
Effective
Floating Point
immed.
A Lists
A
A-759

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simodrive 611 universal e

Table of Contents