Siemens SIMODRIVE 611 universal Function Manual page 855

01.99 04.05
! 611ue diff !
1826 Status test socket 1
Min Standard
0 1
This parameter defines the status of test socket 1 for this drive.
0 test socket is inactive
1 test socket is active
As always only one drive can output one value at a test socket, when changing the parameter
in one drive, the parameter in the other drive is appropriately changed.
Note:
On a 2-axis module, the test sockets are pre-set as follows after the first start-up:
Drive A: Test socket 1 = active (P1826 = 1) and test socket 2 = inactive (P1836 = 0)
Drive B: Test socket 1 = inactive (P1826 = 0) and test socket 2 = active (P1836 = 1)
(refer to the index entry "Test sockets")
1830 Signal number test socket 2
Min Standard
0 14
Description, refer to that for P1820.
1831 Shift factor test socket 2
Min Standard
0 12
Description, refer to that for P1821.
1832 Offset test socket 2
Min Standard
–128 0
Description, refer to that for P1822.
1833 Segment address test socket 2
Min Standard
0 0
Note: Internal Siemens
1834 Offset address test socket 2
Min Standard
0 0
Note: Internal Siemens
1836 Status test socket 2
Min Standard
0 1
Description, refer to that for P1826.
E Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Max Unit
1 –
Max Unit
530 –
Max Unit
47 –
Max Unit
127 –
Max Unit
1 –
Max Unit
FFFFFF Hex
Max Unit
1 –
A.1 Parameter list
Data type Effective
Unsigned16 immed.
Data type Effective
Unsigned16 immed.
Data type Effective
Unsigned16 immed.
Data type Effective
Integer16 immed.
Data type Effective
Unsigned16 immed.
Data type Effective
Unsigned32 immed.
Data type Effective
Unsigned16 immed.
A Lists
A
A-855