Siemens SIMODRIVE 611 universal Function Manual page 42

1 Product Overview
1.3 "SIMODRIVE 611 universal" control board
Table 1-4 Which optional modules can be used for the various software releases?
Case
1. A master configured software, generated
with GSD file siem808f.gsd, can be oper-
ated with
2. A master configured software, generated
with a GSD file siem8055f.gsd and P0875
= 2, can be operated with
3. A master configured software, generated
with a GSD file siem8055f.gsd and P0875
= 2, can be operated with
4. A master configured application, gener-
ated using gsd file si02808f.gsd and
P0875 = 2 can be operated with
1-42
Firmware release
from SW 3.1
before SW 4.1
from SW 4.1
from SW 6.1
Note
Case 1 is for "new" applications with the DP2, DP3 module.
Cases 2 and 3 are for series commissioning of drives using DP1
modules and for replacing a defective DP1 module by a DP2 module.
From SW 4.1, the DP1 module can no longer be used.
Reader's note
Information regarding
S
Installing the optional module
S
The interface (X423)
S
The connection diagram and wiring/connection of the option module
S
Communications via PROFIBUS–DP
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
! 611ue diff !
Optional module
DP1 DP2
no yes
yes yes
no yes
no yes
––> refer to Chapter 2
––> refer to Chapter 2
––> refer to Chapter 2
––> refer to Chapter 5
E Siemens AG 2005 All Rights Reserved
01.99 08.02
DP3
yes
yes
yes
yes