Siemens SIMODRIVE 611 universal Function Manual page 14

Foreword
!
!
!
xiv
Warning
All of the SIMODRIVE unit connections must be withdrawn or
disconnected when the electrical equipment on the machines is subject
to a voltage test (EN 60204–1 (VDE 0113–1), Point 20.4).
This is necessary, as the SIMODRIVE insulation has already been
tested, and should not be subject to a new test (additional voltage
stressing).
Warning
Start–up/commissioning is absolutely prohibited until it has been
ensured that the machine in which the components described here are
to be installed, fulfills the regulations/specifications of the Directive
89/392/EEC.
Warning
The information and instructions in all of the documentation supplied
and any other instructions must always be observed to eliminate
hazardous situations and damage.
S
For special versions of the machines and equipment, the
information in the associated catalogs and quotations applies.
S
Further, all of the relevant national, local land plant/system–specific
regulations and specifications must be taken into account.
S
All work should be undertaken with the system in a no–voltage
condition!
Caution
When using mobile radios (e.g. cellular phones, mobile phones, 2–way
radios) with a transmission power of > 1 W close to the equipment
(< 1.5 m) the function of the equipment can be disturbed.
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
E Siemens AG 2005 All Rights Reserved
06.04