Siemens SIMODRIVE 611 universal Function Manual page 808

A Lists
A.1 Parameter list
1051 IM ref. mark clearance for distance-coded rotary enc.
Min Standard
0 20000
...specifies the basic clearance between two fixed reference marks. If the closed-loop identifies
that the distance between each second reference mark is different and is therefore incorrect,
the axis remains stationary. Fault 508 (zero mark monitoring, motor measuring system) is sig-
naled.
Note:
IM ––> Indirect measuring system (motor encoder)
This monitoring is only activated, if P1051/1000*P1005/360 can either be divided by 16 or by
10.
1052 DM reference mark distance for distance-coded scales (–> 4.1)
Min Standard
0 20000
...specifies the basic clearance between two fixed reference marks. If the closed-loop identifies
that the distance between each second reference mark is different and is therefore incorrect,
the axis remains stationary. Fault 514 (zero mark monitoring, direct measuring system) is sig-
naled.
Note:
DM ––> Direct measuring system
This monitoring is only activated, if P1052/P1034*1000 can either be divided by 16 or by 10.
1053 DM ref. mark distance for distance-coded rotary enc.
Min Standard
0 20000
... specifies the basic distance between two fixed reference marks. If the control recognizes that
the distance between each second reference mark differs, and is therefore incorrect, the axis
remains stationary. Fault 514 (zero mark monitoring, direct measuring system) is signaled.
Note:
This monitoring is only activated, if P1053/1000*P1007/360 can either be divided by 16 or by
10.
1054 IM difference for distance-coded encoders
Min Standard
0 20
0 20
... specifies the distance between two reference marks for distance-coded encoders, indirect
measuring system (motor measuring system).
1055 DM difference for distance-coded encoders
Min Standard
0 20
0 20
... specifies the distance between two reference marks for distance-coded encoders, direct
measuring system.
A-808
Max Unit
4294967295 mDegree
Max Unit
µm
4294967295
Max Unit
4294967295 mDegree
Max Unit
µm
500000
450000 mDegree
Max Unit
µm
500000
450000 mDegree
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
! 611ue diff !
Data type Effective
Unsigned32 PO
Data type Effective
Unsigned32 PO
Data type Effective
Unsigned32 PO
Data type Effective
Unsigned32 PO
Unsigned32 PO
Data type Effective
Unsigned32 PO
Unsigned32 PO
E Siemens AG 2005 All Rights Reserved
04.05 01.99
(–> 4.1)
(–> 4.1)
(–> 8.3)
(SLM)
(SRM ARM)
(–> 8.3)
(SLM)
(SRM ARM)