Siemens SIMODRIVE 611 universal Function Manual page 793

01.99 04.05
! 611ue diff !
0979:32 Encoder format
Min Standard
– –
... specifies the encoder properties.
Sub-indices:
1 Header
2 Encoder type (encoder 1)
3 Encoder resolution (encoder 1)
4 Shift factor for signal G1_XIST1 (encoder 1)
5 Shift factor for absolute values in G1_XIST2 (encoder 1)
6 Resolution can be parameterized (encoder 1)
7 to 11 reserved
12 Encoder type (encoder 2)
13 Encoder resolution (encoder 2)
14 Shift factor for signal G2_XIST1 (encoder 2)
15 Shift factor for absolute values in G2_XIST2 (encoder 2)
16 Resolution can be parameterized (encoder 2)
17 to 21 reserved
22 Encoder type (encoder 3)
23 Encoder resolution (encoder 3)
24 Shift factor for signal G3_XIST1 (encoder 3)
25 Shift factor for absolute values in G3_XIST2 (encoder 3)
26 Resolution can be parameterized (encoder 3)
27 to 31 reserved
Note:
If this parameter is read via non-cyclic communication (PROFIdrive), then the indices have
been shifted. Index 1 corresponds to Index 0 (etc.) in the description of the PROFIdrive profile.
Refer under the index entry "Encoder interface"
0980:999 Number list_1
Min Standard
– –
All of the parameter numbers defined in the drive are saved in parameters 980 – 989 from sub-
index 1. The arrays are assigned consecutively without any gaps. If a sub-index contains a
zero, then this is the end of the list of defined parameters. If a sub-index contains the parameter
number of the next list parameter, then the list continues there.
Note:
If this parameter is read via non-cyclic communication (PROFIdrive), then the indices have
been shifted. Index 1 corresponds to Index 0 (etc.) in the description of the PROFIdrive profile.
0981:2 Number list_2
Min Standard
– –
All of the parameter numbers defined in the drive are saved in parameters 980 – 989 from sub-
index 1. The arrays are assigned consecutively without any gaps. If a sub-index contains a
zero, then this is the end of the list of defined parameters. If a sub-index contains the parameter
number of the next list parameter, then the list continues there.
Note:
If this parameter is read via non-cyclic communication (PROFIdrive), then the indices have
been shifted. Index 1 corresponds to Index 0 (etc.) in the description of the PROFIdrive profile.
E Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Max Unit
– Hex
Max Unit
– –
Max Unit
– –
A.1 Parameter list
Data type Effective
Unsigned32 RO
(–> 6.1)
Data type Effective
Unsigned16 RO
(–> 6.1)
Data type Effective
Unsigned16 RO
A Lists
A
A-793