Table of Contents
Advertisement
1 Product Overview
1.3
"SIMODRIVE 611 universal" control board
1.3.3
Optional modules
Optional
TERMINAL module
I4
X422
I5
8 inputs
I6
I7
I8
I9
I10
I11
O4
O5
O6
O7
X432
O8
8 outputs
O9
O10
O11
Fig. 1-7
Optional TERMINAL module
1-40
An additional 8 digital inputs and outputs can be realized using this
optional module.
The functionality of these inputs/outputs can be freely parameterized.
Note
S
The input/output terminals of the optional TERMINAL module are
– Before SW 4.1: permanently assigned to drive A or axis A
– From SW 4.1: can be freely assigned axes
S
The optional TERMINAL module can be used as follows,
dependent on the software release:
– The following applies before SW 2.4:
The module can only be used in the "positioning" mode.
– The following applies before SW 2.4:
The module can be used independently of the operating mode.
Order No. [MLFB]: 6SN1114–0NA00–0AA0
Reader's note
Information regarding
S
Installing the option
S
The input and output terminals (X422 and X432)
S
The connection diagram and wiring/connecting the option module
is included in Chapter 2.
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
! 611ue diff !
For screws:
Tighten (due to the shield contact)
Max. torque = 0.8 Nm
E Siemens AG 2005 All Rights Reserved
08.01
01.99
Advertisement
Chapters
Table of Contents
