Siemens SIMODRIVE 611 universal Function Manual page 398

6 Description of the Functions
6.2 Positioning mode (P0700 = 3, from SW 2.1)
Parameter
overview
(refer to 6.2.8 and
A.1)
6-398
The following parameters are available for "referencing with distance–
coded measuring system" function:
S
P0161 Stopping at marks (from SW 8.3)
S
P0173 Reference point approach without reference cams
S
P1027 IM configuration, encoder
S
P1037 DM configuration encoder
S
P1050 IM reference mark distance for distance–coded
scales
S
P1051 IM reference mark distance for distance–coded
rotary encoders
S
P1052 DM reference mark distance for distance–coded
scales
S
P1053 DM reference mark distance for distance–coded
rotary encoders
S
P1054 IM difference for distance–coded rotary encoders
(from SW 8.3)
S
P1055 DM difference for distance–coded rotary encoders
(from SW 8.3)
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
! not 611ue !
E Siemens AG 2005 All Rights Reserved
04.05 01.99