Siemens SIMODRIVE 611 universal Function Manual page 536

6 Description of the Functions
6.6 Analog inputs
Parameter
overview
Table 6-53 Parameter for M
No.
0606 Voltage at terminals 56.x/14.x
0611 Voltage at terminals 24.x/20.x
... indicates the analog voltage presently available at this input terminal.
0608 Inversion terminal 56.x/14.x
0613 Inversion terminal 24.x/20.x
An inversion internally inverts the sign of the analog setpoint at this terminal. This causes the
torque to be reversed.
1 Inversion
0 No inversion
0609 Smoothing time, terminal 56.x/14.x (SRM,
SLM)
0614 Smoothing time, terminal 24.x/20.x (SRM,
SLM)
This allows the output of the A/D converter to be smoothed using a PT
0610 Drift/offset correction terminal 56.x/14.x
0615 Drift/offset correction terminal 24.x/20.x
If, for a setpoint input of 0 volt, the motor starts to rotate, and this is not desired, then a voltage
offset can be entered using this parameter to adjust the analog input for zero output
0619 Normalization voltage, torque setpoint
1241:8 Normalization, torque setpoint (SRM, ARM)
Normalization, force setpoint (SLM)
P0619: This defines at which input voltage the torque setpoint normalization is reached.
P1241:8: The parameter represents the reference value for P0619. The standard value for
M
rated
M [Nm]
P1241:8
6-536
The following parameters are provided to parameterize the M
using terminal 56.x/14.x and/or terminal 24.x/20.x:
mode using terminal 56.x/14.x and/or terminal 24.x/20.x
set
Parameters
Description
(ARM)
(ARM)
is pre–assigned "calculate controller data".
U [V]
P0619
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Min. Stan- Max.
dard
– – –
– – –
0 0 1
0 0 1
0.0
0.0 1 000.0
3.0
0.0
0.0 1 000.0
3.0
filter.
1
–9 999.9 0.0 9 999.9
–9 999.9 0.0 9 999.9
5.0 10.0 12.5
1.0 10.0 50 000.0
Standard values:
P0619 = 10
P1241:8 = M
rated
––> at 10 V, M
rated
E Siemens AG 2005 All Rights Reserved
01.99 10.99
! not 611ue !
mode
set
Units Effec-
tive
V(pk) RO
V(pk) RO
– Imme-
diately
– Imme-
diately
Imme-
ms
diately
Imme-
ms
diately
mV(pk) Imme-
diately
mV(pk) Imme-
diately
V(pk) Imme-
diately
Nm
Imme-
diately
N
is reached