Siemens SIMODRIVE 611 universal Function Manual page 733

01.99 04.05
! 611ue diff !
Parameter list The following parameters are available for the "SIMODRIVE 611 uni-
versal" control board:
Version: 08.03.07
0001 Actual traversing block – block number
Min Standard
– –
... in the "Positioning" mode and for the "spindle positioning" function it specifies the block num-
ber of the traversing block being processed.
Note: refer to the index entry "Traversing blocks" or P0080:64
0002 Actual traversing block – position
Min Standard
– –
... in the "Positioning" mode and for the "spindle positioning" function it specifies the pro-
grammed position of the traversing block being processed.
Note: refer to the index entry "Traversing blocks" or P0081:64
0003 Actual traversing block – velocity
Min Standard
– –
... in the "Positioning" mode and for the "spindle positioning" function it specifies the pro-
grammed velocity of the traversing block being processed.
Note: refer to the index entry "Traversing blocks" or P0082:64
0004 Actual traversing block – acceleration override
Min Standard
– –
... in the "Positioning" mode and for the "Spindle positioning" function it specifies the pro-
grammed acceleration override of the traversing block being processed.
Note: refer to the index entry "Traversing blocks" or P0083:64
0005 Actual traversing block – deceleration override
Min Standard
– –
... in the "Positioning" mode and for the "Spindle positioning" function it specifies the pro-
grammed deceleration override of the traversing block being processed.
Note: refer to the index entry "Traversing blocks" or P0084:64
0006 Actual traversing block – command
Min Standard
– –
... in the "Positioning" mode specifies the programmed command of the traversing block being
processed.
Note: refer to the index entry "Traversing blocks" or P0085:64
0007 Actual traversing block – command parameter
Min Standard
– –
... in the "Positioning" mode specifies the programmed command parameter of the traversing
block being processed.
Note: refer to the index entry "Traversing blocks" or P0086:64
E Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
Max Unit
– –
Max Unit
– MSR
Max Unit
– c*MSR/min
Max Unit
– %
Max Unit
– %
Max Unit
– –
Max Unit
– –
A.1 Parameter list
Data type Effective
Integer16 RO
Data type Effective
Integer32 RO
Data type Effective
Unsigned32 RO
Data type Effective
Unsigned16 RO
Data type Effective
Unsigned16 RO
Data type Effective
Unsigned16 RO
Data type Effective
Unsigned16 RO
A Lists
A
A-733