Suzuki Baleno Manual page 1426

6-2-78 ENGINE GENERAL INFORMATION AND DIAGNOSIS (J18 ENGINE WITH WU TWC)
DTC P0460 FUEL LEVEL SENSOR CIRCUIT HIGH INPUT
WIRING DIAGRAM
1. Fuel level meter in combination meter
2. To ignition switch
3. Fuel level sensor (gauge)
4. To fuel pump
5. To ground
DTC DETECTING CONDITION AND TROUBLE AREA
DTC DETECTING CONDITION
Fuel level sensor voltage higher than specified value.
DTC CONFIRMATION PROCEDURE
1) With ignition switch OFF, connect scan tool.
2) Turn ON ignition switch and clear DTC by using scan tool if any.
3) Start engine and run it for 10 sec.
4) Check DTC and pending DTC by using scan tool.
TROUBLE AREA
Fuel level sensor and/or its circuit
D
Fuel level meter and/or its circuit
D
ECM
D