Renesas H8S/2319 series Hardware Manual page 599

Bit 2—Program-Verify (PV): Selects program-verify mode transition or clearing. Do not set the
SWE, ESU, PSU, EV, E, or P bit at the same time.
Bit 2
PV Description
0 Program-verify mode cleared
1 Transition to program-verify mode
[Setting condition]
When FWE = 1 and SWE = 1
Bit 1—Erase (E): Selects erase mode transition or clearing. Do not set the SWE, ESU, PSU, EV,
PV, or P bit at the same time.
Bit 1
E Description
0 Erase mode cleared
1 Transition to erase mode
[Setting condition]
When FWE = 1, SWE = 1, and ESU = 1
Bit 0—Program (P): Selects program mode transition or clearing. Do not set the SWE, PSU,
ESU, EV, PV, or E bit at the same time.
Bit 0
P Description
0 Program mode cleared
1 Transition to program mode
[Setting condition]
When FWE = 1, SWE = 1, and PSU = 1
Rev. 5.00, 12/03, page 569 of 1088
(Initial value)
(Initial value)
(Initial value)