Renesas H8S/2319 series Hardware Manual page 656

Bit 4—Program Setup Bit 2 (PSU2): Prepares for a transition to program mode for addresses
H'040000 to H'07FFFF. Do not set the SWE2, ESU2, EV2, PV2, E2, or P2 bit at the same time.
Bit 4
PSU2 Description
0 Program setup cleared
1 Program setup
[Setting condition]
When SWE2 = 1
Bit 3—Erase-Verify 2 (EV2): Selects erase-verify mode transition or clearing for addresses
H'040000 to H'07FFFF. Do not set the SWE2, ESU2, PSU2, PV2, E2, or P2 bit at the same time.
Bit 3
EV2 Description
0 Erase-verify mode cleared
1 Transition to erase-verify mode
[Setting condition]
When SWE2 = 1
Bit 2—Program-Verify 2 (PV2): Selects program-verify mode transition or clearing for
addresses H'040000 to H'07FFFF. Do not set the SWE2, ESU2, PSU2, EV2, E2, or P2 bit at the
same time.
Bit 2
PV2 Description
0 Program-verify mode cleared
1 Transition to program-verify mode
[Setting condition]
When SWE2 = 1
Bit 1—Erase 2 (E2): Selects erase mode transition or clearing for addresses H'040000 to
H'07FFFF. Do not set the SWE2, ESU2, PSU2, EV2, PV2, or P2 bit at the same time.
Bit 1
E2 Description
0 Erase mode cleared
1 Transition to erase mode
[Setting condition]
When SWE2 = 1, and ESU2 = 1
Rev. 5.00, 12/03, page 626 of 1088
(Initial value)
(Initial value)
(Initial value)
(Initial value)