Renesas H8S/2319 series Hardware Manual page 707

Bit 0
SCO Description
0 Download of the on-chip programming/erasing program to the on-chip RAM is not
executed
[Clear condition] When download is completed
1 Request that the on-chip programming/erasing program is downloaded to the on-
chip RAM is occurred
[Set conditions] When all of the following conditions are satisfied and 1 is written to
this bit
•
FKEY is written to H'A5
•
During execution in the on-chip RAM
•
Not in RAM emulation mode (RAMS in RAMER = 0)
(2) Flash Program Code Select Register (FPCS)
FPCS selects the on-chip programming program to be downloaded.
Bit : 7
—
Initial value : 0
R/W : R
Bits 7 to 1—Reserved: These bits are always read as 0. The write value should always be 0.
Bit 0—Program Pulse Verify (PPVS): Selects the programming program.
Bit 0
PPVS Description
0 On-chip programming program is not selected
[Clear condition] When transfer is completed
1 On-chip programming program is selected
6 5
— —
0 0
R R
4 3
— —
0 0
R R
Rev. 5.00, 12/03, page 677 of 1088
(Initial value)
2 1
— — PPVS
0 0
R R R/W
(Initial value)
0
0