17.13.5 Flash Memory Emulation in RAM
Reading Overlap RAM Data in User Mode and User Program Mode: Emulation should be
performed in user mode or user program mode. When the emulation block set in RAMER is
accessed while the emulation function is being executed, data written in the overlap RAM is read.
SCI
Flash memory
RAM
Overlap RAM
Emulation block
(emulation is performed
on data written in RAM)
Application program
Execution state
Figure 17-37 Reading Overlap RAM Data in User Mode and User Program Mode
Rev. 5.00, 12/03, page 617 of 1088