Returning From Current View To User View; Entering System View From User View; Displaying The System Status - Huawei Quidway S3100 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S3100 Series Ethernet Switches
Table 2-6 Return from current view to lower level view
Operation
Return from current
view to lower level
view

2.1.7 Returning from Current View to User View

Perform the following operation in any view.
Table 2-7 Return from current view to user view
Operation
Return from current
view to user view

2.1.8 Entering System View from User View

Perform the following configuration in user view.
Table 2-8 Enter system view from user view
Operation
Enter system view
from user view

2.2 Displaying the System Status

You can use the following display commands to check the status and configuration
information about the system. For information about protocols and ports, and the
associated display commands, refer to relevant sections.
Perform the following operations in any view.
Command
quit
Command
return
Command
system-view
Huawei Technologies Proprietary
2-3
Chapter 2 Basic System Configuration
Description
This operation will
result in exiting the
system
view is user view.
Description
The composite key
<Ctrl+Z>
same effect with the
return command.
Description
—
& Debugging
if current
has the